Industrial peristaltic hose pump is a new type of multifunctional industrial pump developed by absorbing foreign advanced technology. It completely eliminates the working mode of the traditional pump impeller and shaft seal, and has great advantages when transporting media containing high viscosity, high corrosion and a large amount of fluid impurities. This is a completely different principle from traditional pumps and has a wide range of applications.

The working principle of the industrial peristaltic pump: A special rubber hose is connected inside the pump, which has a smooth inner wall and reliable strength. A pair of pressure rollers rotate and squeeze along the rubber hose, squeezing the hose. This rotation causes the media to flow toward each other. After the hose transfers the medium, the hose returns to its original shape under the action of the elasticity of the crushed hose and the side guide rollers. At this time, a high vacuum is generated in the hose. The medium is sucked into the lumen again. Then, the medium is discharged from the tube under the pressure of the subsequent pressure roller. From the beginning of the cycle, the medium is continuously sucked in and discharged.

Features of industrial peristaltic pump:

1. No valve operation, no backflow, stable pump flow and low failure rate.

2. Freely replace the suction port and exhaust port. When the pump is blocked, the reversible pump can be cleaned.

3. High vacuum and strong self-priming ability.

4. Convenient maintenance and fragile parts (not including squeeze hose).

Before the industrial peristaltic pump starts to run, please make the following preparations.

1. Check whether the reducer in the pump chamber is sufficiently lubricated.

2. Make sure that the inlet and outlet pipes of the pump are properly installed and fixed. Whether the bolts on each flange are tightened.

3. Make sure that the inlet valve and outlet valve of the pump are both open.

4. Press the start and stop buttons to start the pump, check whether the rotation of the motor matches the inlet and outlet of the pump, and check whether the pump is stuck.

The industrial peristaltic pump applications:

1. Chemicals: corrosive, acids, alkalis, phosphate solutions, inorganic materials, crystalline liquids, suspensions, emulsions, resins, electroplating solutions, electrolytes and sediments.

2. Agriculture: phosphate fertilizer, compound fertilizer, thick slurry, sedimentation sludge.

3. Structure: mortar, mortar, cement slurry, soil slurry, sludge slurry, lime slurry, foamed concrete, architectural coatings, fireproof materials, accelerators, soft mud, waste water, sewage, etc.

4. Petroleum industry: drilling fluid, crude oil.

5. Coarse industry: ceramic paste, glaze, glaze.

6. Mining: gold slurry, tailings, thick slurry, filler, underground drainage, adsorbent, slurry, mortar...

 If you are interested in peristaltic pump , please contact us.