High pressure dry run peristaltic pump (also known as peristaltic pumps, squeeze hose pumps, and industrial hose pumps) work by squeezing the hose with rollers or sliders. High pressure dry run peristaltic pump is idle, self-priming, capable of handling high viscosity, high wear media.

Features of the high pressure dry run peristaltic pump:

1. Strong self-priming capacity, maximum 8m purified water suction range. Used as a self-priming pump.

2. Since there is no unique structure and seal, there is no leakage or leakage of the self-priming pump even when the requirements for site management are high.

3. Can transport corrosive slurry pumps and sludge pumps that are high in particles, fibers and other impurities.

4. Due to the low flow rate of the medium and no shearing force, it is especially suitable for carrying materials that are sensitive to shearing force.

5. Can transport high viscosity media and 3-phase mixed media of gas, liquid and solid.

6. By adjusting the speed of the pump, you can adjust the flow rate without basically changing the outlet pressure of the pump.

7. Change to different hose materials that can be applied to different media.

The high pressure dry run peristaltic pump features:

The high pressure dry run peristaltic pump are particularly suitable for corrosive media with high solid content and high viscosity and have self-priming performance. Used in industries such as smelting (gold, silver, copper, lead, zinc, tin, nickel, cobalt, manganese), phosphorus compound fertilizers, titanium dioxide, rare earths, desulfurization, environmental protection, water treatment, papermaking and paints. Wide range of applications. The specific applications are:

1. Transportation of drilling mud, crude oil, gasoline, kerosene and other organic solvents and fuel oils in the petroleum industry.

2. Acid, alkali, salt and phosphoric acid supply pumps, titanium dioxide supply pumps, and calcium citrate supply pumps in the chemical industry. Crystals, suspensions, latexes, resins, sludges, and various materials and liquids are transported.

3. Slurry transfer pumps, anode mud transfer pumps, purification filter press pumps, and rare metal liquid transfer pumps in the smelting industry.

4. Drug delivery in the pharmaceutical industry.

5. Mud pumps, lime slurry pumps and impurity pumps in the water treatment and desulfurization industry.

Before the high pressure peristaltic pump is activated, make the following preparations before starting it.

1. Check if the reducer lubrication in the pump cavity is sufficient.

2. Make sure that the pump inlet and outlet pipes are properly installed and secured. Whether the bolts on each flange are tightened.

3. Make sure the pump inlet and outlet valves are all open.

4. Press the start and stop buttons to start the pump, check if the rotation of the motor matches the inlet and outlet of the pump, and check if the pump is stuck. If all the above checks are correct, you can start the test operation. If there are no abnormalities in all aspects, it can be operated normally.

If you are interested in the high pressure peristaltic pump , please contact us!