Peristaltic hose pump for slurry were developed by absorbing international advanced technologies widely used in the chemical industry, petroleum, water treatment, medicine, food, metallurgy, mining, mining, construction and building materials. The principle of the peristaltic hose pump for slurry is that a pair of pressure coil rotate and push along a special rubber tube to flatten the hose. Due to the elasticity of the tube itself and the force of the side guide slurry, the tube returns to its original state, creating a high vacuum and sucking in fluid.
Features of the peristaltic hose pump for slurry:
1. Unique structure and advanced technology. Unique sealless construction, no leaks or contamination, using advanced technology, rolling does not require lubricant.
2. Strong corrosion resistance. The fluid absorbed by the pump only contacts the hose, which can transport varying viscosities, densities, degrees of corrosion, and corrosive fluid materials. It can transport liquid materials containing solid particles, crystals, fibrous materials and other impurities. ..
3. Strong self-absorption ability. No blockage or failure will occur. The self-suction ability is strong and self-cleaning, and the material can be sucked back and forth. To start the pump, it is not necessary to fill the pump. with high lift and high pressure at the pump port.
4. Easy operation and less consumption. Easy installation and maintenance, low maintenance cost, simple operation, low power consumption, high volumetric efficiency, excellent weighing capacity.
The peristaltic hose pump for slurry employs spiral bevel gears rather than cycloid windmill reducer gearboxes. Slurry transfer peristaltic pump with higher load capacity and overload resistance, smooth operation and long life. Why are so many customers willing to choose a slurry transfer peristaltic pump for their projects? The reason is that slurry transfer peristaltic pumps are much more adaptable. Peristaltic slurry transfer Peristaltic pumps typically consist primarily of pump houses, rotors, idle, idle electro, squeeze hoses and drive units. The squeeze hose of the pump house is U- shaped, and the hose deforms when the rotor rotates the fold. After the coil rotate, the deformed hose recovers due to its elasticity. Therefore, a negative pressure in this hose is generated, sucking the slurry and efficiently it from the outlet under the indentation. of the roller, finally forming the pressure transfer of the slurry.
The peristaltic hose pump for slurry is widely used in various fields in China and are exported to more than 30 countries. Various models of slurry transfer peristaltic hose pumps can be designed according to your pressure and power requirements.