Large extruded industrial hose pump for sale is widely used in dangerous environments such as oil exploration, oil training, chemical and military industries, and in dangerous areas such as offshore oil platforms and tankers, and in scene lighting.

Large extruded industrial hose pump (also known as peristaltic pumps, squeeze hose pumps, and industrial hose pumps) work by squeezing the hose with rollers or sliders. The large extruded industrial hose pump operates dry and self-priming and can handle high viscosity, high wear media.

Features of the large extruded industrial hose pump for sale:

1. Strong self-priming capacity, maximum 8m purified water suction range. Used as a self-priming pump.

2. Since there is no unique structure and seal, there is no leakage or leakage of the self-priming pump even when the requirements for site management are high.

3. Can transport corrosive slurry pumps and sludge pumps that are high in particles, fibers and other impurities.

4. Due to the low flow rate of the medium and no shear force, it is especially suitable for carrying materials that are sensitive to shear force.

5. Can transport highly viscous media and 3-phase mixed media of gas, liquid and solid.

6. By adjusting the speed of the pump, you can adjust the flow rate without basically changing the outlet pressure of the pump.

7. Change to different hose materials that can be applied to different media.

Before the industrial hose pump for sale is activated, make the following preparations before starting it.

1. Check if the reducer lubrication in the pump cavity is sufficient.

2. Make sure that the pump inlet and outlet pipes are properly installed and secured. Whether the bolts on each flange are tightened.

3. Make sure the pump inlet and outlet valves are all open.

4. Press the start and stop buttons to start the pump, check if the rotation of the motor matches the inlet and outlet of the pump, and check if the pump is stuck. If all the above checks are correct, you can start the test operation. If there are no abnormalities in all aspects, it can be operated normally.

Special notes: 1. The inlet and outlet valves must be fully open when the industrial hose pump for sale is operating. Otherwise, the hose will be damaged and the motor will be damaged. 2. If the transport medium produces a hard precipitate, rinse with clean water before stopping. Otherwise, the next time you turn on the machine, the runners and couplings may crack and the motor may be damaged.