Requirements for the design and selection of industrial squeeze hose pumps:
1. When the process conditions have no specific requirements, then the flow rate of the selected pump can be greater than the actual demand flow rate.
2. When the process conditions are in continuous production, then its actual actual flow rate should be consistent with the rated flow rate. If there are special needs, then you can choose a variable frequency speed control pump.
4. The temperature of the hose should be less than 100 ℃, which mainly generates heat during the work. If the surrounding heat dissipation conditions are better, the temperature of the medium can reach one hundred.
5. The main component is natural rubber, so when choosing, we must consider the adaptability of the hose to the medium.
6. The import and export are in the same direction, and the import and export can be exchanged with each other, which can be determined according to the specific situation.

Precautions for using industrial squeeze hose pump
1. When using the industrial squeeze hose pump, please do not tighten the pressure regulating plate too tightly, so as not to "stick" the pump head. Generally, it is sufficient to adjust the liquid to flow out to extend its service life.
2.  When the pump head is in rapid operation, do not press the "Sequential / Reverse" switch. If you want to press it, first slow down the speed and then press it, and then adjust the speed to the original speed, that is, adjust the voltmeter reading To the original value.
3.  During the use of industrial squeeze hose pump, you should always pay attention to whether the hose is intact. Generally, it is better to run at medium speed. When the hose is found to be aging, you should replace the hose in time.
4.  The pump head should be cleaned after use. If not used for a long time, the hose should be removed to prolong its service life.
5.  When the industrial squeeze hose pump is not used for a long time, please remove the hose from the pump head to extend its service life. The hose is a fragile item, please replace it in time after using it for a period of time. Otherwise it will cause liquid leakage and damage the instrument!
6.  According to different media and different flow rates, please choose hoses of different thickness.