High power peristaltic hose pump is the main product of Gaodetec hose pump manufacturer. It has the characteristics of simple and compact structure, easy to manufacture, few faults, convenient operation and maintenance, convenient maintenance, low cost, etc. It is suitable for a variety of mixed fluids. The main features of high power peristaltic hose pumps are:

(1) It is a volume spring type, which has the characteristics of no mechanical seal, strong self-priming ability and self-cleaning.

(2) There is no pump valve, which will not cause leakage and air blockage of the sealed pump, prevent operation, dripping, dripping, leakage loss and pollution caused by leakage, and the work place is clean.

(3) The structure of the high-power peristaltic hose pump is simple. It has no impeller, no containers and other structures. It is highly adaptable and can transport liquids, slurries and viscous suspended substances. Especially the flexible hose cavity can pump impurities. Liquids with a diameter less than 1/4 of the hose diameter, various fibrous objects and solid slurry, and the smooth inner cavity of the hose will not cause any blockage. Larger solid particles are allowed. The concentration of the transport medium can be greater than 70%. Therefore, it is very suitable for conveying high-concentration materials.

(4) No pump is required before running. When the pump is stopped, the rotor itself acts as a valve. Prevent backflow. During idling, no faults such as the spindle being stuck.

(5) The pumped liquid level gauge is in contact with the rubber tube, so it can transport acid and alkali corrosion that the rubber can withstand. The high-power peristaltic hose pump is a toxic, sterile, radioactive and abrasive medium with a relatively high surface High content. Hygienic requirements are very high, and materials with damaged shear forces are not allowed, such as slurry transportation for process operations such as beneficiation and aeration. It can replace ordinary stainless steel pump. Its gentle low shear force minimizes damage to some fragile media. The activity of the fluid is not destroyed. The conveying medium is only in contact with the rubber tube, which overcomes the disadvantage of excessive wear of the pump parts, so the pump body and the like need only be made of ordinary materials, and the cost is low.

(6) Can be reversed. No need to set inlet and outlet, low energy consumption, high hydraulic and volumetric efficiency.

(7) It has good metering ability and can be used as a t-meter pump. The flow can be changed by selecting the size of the tube and the speed of the joint. Wide flow range, high accuracy and repeatability. The flow accuracy can be less than 10%, and it is not affected by the viscosity change of the medium.

Care should be taken when selecting a high-power peristaltic hose pump. The key equipment of squeeze pump to realize speed control is speed motor or frequency converter. In any case, due to the shortcomings of high failure rate and large maintenance, the variable speed motor is replaced by the frequency control of motor speed technology. Selecting the appropriate frequency control equipment is a very important link to give full play to the efficiency of the peristaltic pump.

Adopting correct maintenance methods to extend the service life of pumps and frequency converters is the foundation of a smooth production process. First, install the inverter in a proper location to avoid contact with oil, water, pulp and other media, and avoid accidents. Then, follow the instruction manual of the provided method and treatment method to timely maintain the mechanical parts.