China peristaltic pump is absorbing the foreign advanced technology and the development of a new, multifunction and multipurpose industrial pump.It completely out of the running mode of traditional pump impeller and shaft seal and impurities on the viscosity, corrosive, fluid medium transport has a great advantage, using the principle of very different from the traditional pump, wide application range. Peristaltic pump fill equipment can convey high viscosity slurry. It can be used for pressure grouting and spring on the surface, and it also can act as metering pump.
Peristaltic pump fill equipment are recommended for pumping clean water without abrasive particles and liquids that are non-corrosive. For domestic use and sprinkling irrigation for garden as well as supplying water to hotel, villa and high building. Must be installed in enclosed place or keep it away from inclement weather.
A composite, reinforced flexible hose is rolled and squeezed along a predetermined length, positively displacing the fluid contained within the hose. China peristaltic pump employs a drive-coupled rotor with mounted shoes or rollers, which continually compress and occlude some portion of the hose. This action moves the fluid through the hose with a constant rate of displacement for each revolution of the rotor, providing a precise volume of fluid pumped through the hose. A specially developed lubricant contained within the pump head reduces hose wear as a result of contact with the pressing shoes or rollers.
The degree of vacuum in China peristaltic pump body is generated by alternately extruding special hose with the pressure roller cycle. The press roll squeezing hose and conveys the material forward to the outlet, and at the same time, the pressure roller returns from the special hose and the rebound of the hose will inhale more inlet fluid. Since each press roller is a fully pressurized hose, the material doesn't flow back, providing accurate metering system and pressure performance. The conveying material is only in contact with the inner wall of the hose, so it is not necessary use expensive sealing system, valves and other auxiliary equipment, can be easily transport abrasive material. Mining, benefication: Filling materials in gold mining, ore slurry in gold smelting process; Concentrated pulp, underground channel drainage, adsorbent, mortar and mortar.
The hose of China peristaltic pump is the core component that determines the performance, durability and efficiency of the peristaltic pump. We have a unique chemical formula developed independently and use high-quality synthetic rubber to produce the pump hoses. The rubber is reinforced with multi-layered material and subjected to high-precision machining. Therefore, the hose can be sensitive material due to backflow, reduce the metering accuracy, or caused the abrasive materials to erodes the components.
Peristaltic pump for filling consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller's push, finally forms pressure conveying of slurries.